sand mill

  • 2L Vertical Nano-closed Sand Mill

    Cyclic grinding process continues to meet quality requirements. Low material temperature can be controlled, because the material temperature rise is lower than through type. Additionally, cooling and exchange systems can be added to pipes and material tanks. One-time or more-time-pass, with higher output

    Email Detalles
  • Double Cone Horizontal Sander

    La máquina de molienda nano de cerámica es un tipo de equipo de molienda ultrafino no contaminante totalmente de cerámica desarrollado para nano-finura. Utiliza dispersores de turbina multigrupo avanzados, que pueden introducir energía cinética en multicanal para lograr una distribución muy estrecha y uniforme. La finura de molienda puede alcanzar rápidamente 1um-50nm. Las piezas de material de contacto de la máquina rectificadora horizontal, como el dispersor y el eje giratorio, se seleccionan de acuerdo con los requisitos del usuario (cerámica de circonio, poliuretano de ingeniería). Carburo de tungsteno, acero aleado de alta resistencia al desgaste, etc. Características de la nano-amoladora MITR: Sello mecánico de doble extremo, separador de turbofiltro frontal. El material de toda la sala de molienda está hecho de cerámica resistente al desgaste con alta dureza, resistencia al desgaste y mayor vida útil. Cero contaminación por metales, sin conductividad, sin conductividad magnética, nunca cambio de color, duradero, larga vida útil.

    Email Detalles
  • 30L High Efficiency Horizontal Sander

    Nano-abrasive mill and circular grinding system are suitable for all fields, but also for all viscosities and almost all products. The minimum diameter of grinding beads can be used to reach 0.1 mm. The maximum output and nano-fineness range can be achieved quickly and successfully, and the minimum fineness can reach D97 < 100 nm.

    Email Detalles
  • 30L Nano Rod Pin Sander

    As for blades, our equipment has a wide range of grinding material adaptability, according to different materials, we can select and match the material of parts in contact with the product. Such as adding hard steel, stainless steel, tungsten carbide, zirconia, silicon carbide, PU materials, polyurethane, etc. We usually recommend different materials and models (disc/pin/cone) according to the performance of the customer's products, such as water/oil property, product viscosity, color requirement, final desired fineness, temperature sensitivity, color, etc. For water-based blades or polymer blades, solvent-based blades are recommended. Ceramics or CITIC's unique wear-resistant blades can be selected if absolute colorlessness or high purity are required.

    Email Detalles
  • Paint And Coating Equipment

    The characteristics of nano-grinding machine are high speed grinding, speed can be set, centrifugal separation system separates materials, materials are inhaled by diaphragm pump, sent to the grinding chamber through pipeline system, and discharged through the separation system after grinding. The flow rate of the diaphragm pump can be adjusted according to different fineness of the material, and the grinding time of the material in the grinding chamber can be determined. Finally, qualified products can be produced. In the grinding process, the material temperature is used to automatically control the grinding speed to ensure that the material quality is not affected by the excessive temperature change. Material temperature can be set by itself to adapt to the grinding of different materials and achieve a multi-purpose machine. Leech nano-abrasive grinder adopts high precision bearing and assembled double-end mechanical seal with wear resistance and corrosion resistance, and designs lubrication cooling monitoring and pressure balancing mechanism of the seal. In order to achieve better grinding effect, please select the appropriate grinding medium.

    Email Detalles
  • Mixing Tank

    Mixing tanks can also be called water phase tanks, which are widely used in coatings, pharmaceuticals, building materials, chemicals, pigments, resins, food, scientific research and other industries. The equipment can be made of carbon steel, stainless steel and other materials according to the process requirements of the user's products, as well as heating and cooling devices to meet different process and production needs. The heating form has jacket electric heating and coil heating. The structure of the equipment is reasonable in design, advanced in technology, durable in use, and has the characteristics of simple operation and convenient use. It is an ideal chemical equipment with low investment, fast production and high profit.

    Email Detalles
  • Integrated Equipment

    Le Chi nanorod pin grinding machine, cycle grinding system is applicable to all fields, but also to all viscosities and almost all products. The minimum diameter of grinding beads can be used to reach 0.1 mm, and the maximum output and nano-fineness range can be achieved successfully and quickly. The minimum fineness can reach D97 < 100 mm. Technical Advantages and Advantages of Large Flow Cyclic Grinding A shorter and larger diameter grinding chamber can reduce the flow inertia force. Separation System with Longer Diameter High Flow Guarantee High Efficiency Cyclic Operation Mode Coolable grinding shaft High energy grinding system, high strength, high effect Small-sized machines with the same rotational speed can reduce material loss during material exchange. Simple process control Cyclic grinding process continues to meet quality requirements Low material temperature can be controlled because the material temperature is raised and the passing mode is low. Additionally, cooling conversion systems can be applied to pipes and material tanks. One or more passable modes have higher yields.

    Email Detalles
Obtenga el último precio? Le responderemos lo antes posible (dentro de las 12 horas)

Política de privacidad