Plataforma inteligente integrada

  • Paint And Coating Equipment

    Paint And Coating Equipment


    The characteristics of nano-grinding machine are high speed grinding, speed can be set, centrifugal separation system separates materials, materials are inhaled by diaphragm pump, sent to the grinding chamber through pipeline system, and discharged through the separation system after grinding. The flow rate of the diaphragm pump can be adjusted according to different fineness of the material, and the grinding time of the material in the grinding chamber can be determined. Finally, qualified products can be produced. In the grinding process, the material temperature is used to automatically control the grinding speed to ensure that the material quality is not affected by the excessive temperature change. Material temperature can be set by itself to adapt to the grinding of different materials and achieve a multi-purpose machine.
    Leech nano-abrasive grinder adopts high precision bearing and assembled double-end mechanical seal with wear resistance and corrosion resistance, and designs lubrication cooling monitoring and pressure balancing mechanism of the seal. In order to achieve better grinding effect, please select the appropriate grinding medium.

    Email Detalles
  • Integrated Equipment

    Integrated Equipment


    Le Chi nanorod pin grinding machine, cycle grinding system is applicable to all fields, but also to all viscosities and almost all products. The minimum diameter of grinding beads can be used to reach 0.1 mm, and the maximum output and nano-fineness range can be achieved successfully and quickly. The minimum fineness can reach D97 < 100 mm.
    Technical Advantages and Advantages of Large Flow Cyclic Grinding
    A shorter and larger diameter grinding chamber can reduce the flow inertia force.
    Separation System with Longer Diameter
    High Flow Guarantee High Efficiency Cyclic Operation Mode
    Coolable grinding shaft
    High energy grinding system, high strength, high effect
    Small-sized machines with the same rotational speed can reduce material loss during material exchange.
    Simple process control
    Cyclic grinding process continues to meet quality requirements
    Low material temperature can be controlled because the material temperature is raised and the passing mode is low.
    Additionally, cooling conversion systems can be applied to pipes and material tanks.
    One or more passable modes have higher yields.

    Email Detalles
  • Bead Mill Machine

    Bead Mill Machine

    La máquina rectificadora de moldes Jinhe es simple en apariencia, compacta en estructura y conveniente en operación.
    Combina las ventajas de todos los molinos horizontales, el molido más fino y la distribución de partículas más estrecha.
    Método de sellado: sello de labio, sello simple y sello mecánico doble. Los sellos del eje están hechos de diferentes materiales en varios estilos. Los solventes que se funden con los materiales se usan como refrigerante de sello mecánico para eliminar la contaminación de los materiales.
    El dispositivo de protección automática de presión garantiza la estabilidad de la presión en la cámara de molienda. Protección automática eléctrica de rango completo, motor a prueba de explosiones y correa de transmisión antiestática de tipo V, más segura. Adecuado para la producción en masa de maquinaria, bombeo continuo, para una gran cantidad de productos de un solo color, más en línea con los beneficios económicos.

    Email Detalles
Obtenga el último precio? Le responderemos lo antes posible (dentro de las 12 horas)

Política de privacidad